1.800.667.3367 info@upwardor.com

Specifying Garage Doors for Buffalo’s Lake-Effect Winters

Buffalo’s winters are shaped by Lake Erie. Lake-effect snow, cold wind off the water and long stretches below freezing all put extra demands on overhead doors, whether on a house, a fire hall or a distribution warehouse. Here is what contractors and builders in Western New York should weigh when specifying doors.

Insulation: keep the heat where it belongs

An overhead door is often the largest uninsulated opening in a building. For heated garages, shops and loading areas, a high R-value pays off every winter.

  • TX760: a commercial and industrial sectional door with CFC/HCFC-free polyurethane insulation foamed in place, for an R-value of up to 27.7. It is LEED compliant.
  • Thermalex®: Upwardor’s insulated steel commercial series, designed for energy efficiency and long-lived durability.
  • Kanata Collection™: Upwardor’s most energy-efficient residential door, 1-3/4″ thick with polyurethane insulation.
  • Craft Series™: a 1-3/4″ thick three-section residential door with an R-value of 16.3.

Thermal breaks: stop cold from travelling through

Steel and aluminum conduct cold. A thermal break separates the outside face of the door from the inside so frost and condensation don’t form on the interior. The TX760’s thermal break behind the tongue is chemically sealed and bonded, and the Solalite™ aluminum door uses a thermally broken frame that inhibits cold transfer from outside to inside, which makes it a fit for cold-weather climates.

Wind load: plan for exposure

Open sites and buildings near the lake can see strong, sustained wind. Some Upwardor commercial models offer design options for wind loads up to 130 mph. Make wind exposure part of the spec from the start, not a field fix.

Snow, salt and moisture

Snow packed against a door, meltwater and road salt tracked in on vehicles all speed up wear. For service bays and car washes, look at corrosion-resistant aluminum such as Solalite™ and hardware like the Nystroll Roller, developed for caustic, high-cycle applications.

Specs and quotes

Upwardor’s brochures, specifications and warranty documents cover each door line. To discuss a project in Western New York, request a quote or call 1.800.667.3367. Non-domestic orders are handled by Upwardor International Inc.

More from Upwardor for Buffalo and Western New York